logo_color_S165_2x_bg social_03

Since 1952

PHONE: (317) 898-0750  

Grinding and Polishing Machinery Swing Frame Grinder Machine Indianapolis Indiana

header2
Watch Grinding & Polishing Videos Contact Wheels Idler Pulleys Instructions & Parts Lists 1418441391_settings-24-128

GRINDING AND POLISHING MACHINERY * 2801 TOBEY DRIVE INDIANAPOLIS, IN 46219

Copyright G&P Machinery * Website designed by NVS Design Inc.

Wolfhead & Vonnegut Sanding Heads
Back

SWING - FRAME GRINDER PARTS LIST AND INSTRUCTIONS

Instructions Swing Frame grinder 2 Instruction SFG Graph 2 Swing Frame Grinder Graph 1 Swing Frame Grinder

LUBRICATION

One alemite fitting on the swivel housing, item 5, requires periodic lubrication with a good grade of grease as use dictates.

 

BELT TENSIONING

Pressure required for tensioning the abrasive belt is determined by the width and grade of the belt. Set the pressure just high enough to drive and track the belt-maximum on heavy coarse belts.

 

ADJUSTMENTS

Tracking of the abrasive belt is accomplished by turning the tracking knob, item 19, to the right or left, Swivel lock, item 18, controls the swivel adjustment; to tip the contact wheel radially to the left or right. This can be locked at any point.

CHANGING CONTACT WHEEL

Remove the screws holding the outer flange, remove the flange, then the old tire and install the new tire. Be sure the rim of the new tire is on the pilot or shoulder of inside hub before replacing outer flange.

SAFETY WARNINGS

WARNING: BE SURE THE MACHINE IS PROPERLY SUPPORTED FROM AN OVERHEAD

HOIST WITH A CAPACITY OF AT LEAST 2 TONS, IF BEING USED AS A SWINGFRAME GRINDER. BE SURE IT IS PROPERLY SUPPORTED REGARDLESS OF THE APPLICATION. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.

 

WARNING: BE SURE THE POWER SUPPLY IS LOCKED-OUT PRIOR TO IINSTALLING THE MACHINE. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.

 

WARNING: ALWAYS WEAR EYE PROTECTION AND SAFETY SHOES WHEN OPERATING THIS GRINDER. AVOID LOOSE CLOTHING, FAILURE TO HEED THIS WARNING COULD RESULT IN SERIOUS INJURY.

 

WARNING: BE SURE POWER SUPPLY IS LOCKED-OUT PRIOR TO PERFORMING ANY

SERVICE OR MAINTENANCE OPERATIONS. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.

 

WARNING: BE SURE ALL GUARDS ARE IN PLACE BEFORE OPERATING THIS MACHINE.

THE BELT IS ENCLOSED EXCEPT FOR THE GRINDING AREA. BEWARE OF THIS AREA. FAILURE TO HEED THIS WARNING COULD RESULT IN SERIOUS INJURY.

 

WARNING: BE SURE POWER SUPPLY IS LOCKED-OUT PRIOR TO CHANGING THE ABRASIVE BELT AND THAT THE BELT AND PULLEYS ARE NOT MOVING. BE SURE BELT GUARD DOO IS CLOSED AND LATCHED BEFORE STARTING AND RUNNING. FAILURE TO HEED THIS WARNING COULD RESULT IN SERIOUS INJURY.

Back

Swing Frame Grinder Parts List

made in USA

Additional Categories